श्रेणियाँ
नये उत्पाद
LDC-100 बड़े व्यास ऑप्टिकल फाइबर क्लीवर * क्लैडिंग व्यास 80μm ~ 600μm फाइबर के लिए लागू *वैक्यूम पंप वी-नाली फाइबर डालने के लिए सुविधाजनक है *डी टिकाऊ ब्लेड, जीवनकाल 20000 से अधिक बार *डेटा भंडारण 4000 समूह * उपयोगकर्ता के अनुकूल जीयूआई मेनू, संचालित करने में आसान अधिक
S-22 मल्टी-कोर फाइबर फ्यूजन स्प्लिसर चीन में पहला पूरी तरह से एक यूटोमैटिक एम मल्टी - कोर एफ फाइबर एफ यूजन एस प्लिसर अधिक
ध्रुवीकरण बनाए रखने (PM) फाइबर फ्यूजन Splicer के एस-12 * कोर के कोर संरेखण, कम splicing के झड़ने * Endview और प्रोफ़ाइल अवलोकन और संरेखण * चाप स्वचालित अंशांकन और splicing * प्रधानमंत्री फाइबर 45 और 90 डिग्री के संरेखण अधिक
एस-37 एलडीएफ स्पेशलिटी फाइबर फ्यूजन स्प्लिसर SHINHO S-37 हमारे द्वारा विकसित नवीनतम मॉडल है, यह फाइबर क्लैडिंग व्यास को 125 से 400μm तक कम ब्याह हानि के साथ विभाजित कर सकता है। हमने मशीन को 3 अलग-अलग फाइबर होल्डर और 2 जोड़े अतिरिक्त इलेक्ट्रोड से लैस किया। अधिक
कोर से कोर अलाइनमेंट फाइबर फ्यूजन स्पाइसर x900 छह मोटर्स फ्यूजन स्पाइसर, कोर संरेखण प्रौद्योगिकी के लिए वास्तविक कोर। 6s splicing, 16s हीटिंग, स्वचालित रूप से फाइबर प्रकार की पहचान करें। वान / आदमी / दूरसंचार परियोजनाओं के लिए उपयोग किया जाता है। अधिक
मजबूत मल्टी फंक्शन आर्क फ्यूजन स्पाइसर एस 16 मजबूत औद्योगिक डिजाइन, विरोधी सदमे, धूल के सबूत और निविड़ अंधकार। नंगे फाइबर, पैच डोरियों, ड्रॉप केबल आदि के लिए मल्टी फंक्शन होल्डर तेजी से splicing और हीटिंग, स्वचालित चाप अंशांकन। अधिक
SHINHO X-18 रिबन फाइबर थर्मल स्ट्रिपर शिन्हो X-18 थर्मल स्ट्रिपर एक नव विकसित हाथ से आयोजित थर्मल स्ट्रिपर है, जिसे विशेष रूप से 12 फाइबर तक रिबन केबल के जैकेट के गैर-विनाशकारी थर्मल स्ट्रिपिंग के लिए डिज़ाइन किया गया है। रिबन फाइबर स्प्लिसिंग कार्य के लिए एक अच्छा और विश्वसनीय उपकरण। अधिक
उच्च परिशुद्धता फाइबर ऑप्टिक क्लीवर X-50D छोटे आकार और हल्के वजन, संचालित करने में आसान। उच्च परिशुद्धता और स्थिर प्रदर्शन। 48000 से अधिक समय ब्लेड जीवन, एफ आईबर क्लीव्ड लंबाई 5 ~ 20 मिमी। उच्च गुणवत्ता वाली सामग्री अधिक
Polarization-Maintaining Fiber (PMF): A Key Fiber for Advanced Optical Communication and Precision Sensing
With the rapid development of coherent communication, fiber optic gyroscopes, high-precision sensing, and high-speed optical communication, Polarization-Maintaining Fiber (PMF) is becoming increasingly important.
Unlike standard single-mode fiber, PMF uses a specially designed structure to create stable birefringence, allowing the fiber to maintain a stable polarization state even under external disturbances such as bending and temperature changes.
Simply put: standard optical fiber focuses on transmitting light, while PMF also needs to maintain the stability of the light’s polarization state.
· Fiber Optic Gyroscopes & Inertial Navigation: Improve the accuracy of rotational measurements.
· Coherent Optical Communication: Used for polarization control and high-speed optical signal transmission.
· Fiber Optic Sensing & Interferometry: Improve measurement stability and sensitivity.
· High-Speed Optical Communication & Data Centers: As 800G, 1.6T, and other high-speed optical interconnect technologies continue to develop, the use of PM fiber and related components is also expanding.
Due to the special structure of PM fiber, splicing requires not only accurate alignment of the fiber ends, but also precise alignment of the polarization axes.
Therefore, PM fiber splicing places higher demands on the splicer’s core alignment, rotational alignment accuracy, splicing parameters, and fiber holders.
Designed for PM fiber applications of different sizes, the Shinho S-12PM Series fusion splicers support PM fibers with cladding diameters ranging from 60–80 μm up to a maximum of 400 μm.
This provides a wide range of solutions, from small-diameter PM fibers to larger-cladding specialty polarization-maintaining fibers.
As advanced optical communication, fiber optic sensing, and inertial navigation continue to develop, the demand for PM fibers and specialized PM fiber splicing equipment is expected to grow.
Shinho Optics — Professional, high-precision fusion splicing solutions for PM fibers and specialty optical fibers.
© कॉपीराइट: SHINHO OPTICS LIMITED सर्वाधिकार सुरक्षित.